Service of IZh 2126
	1. General information
	2. Engine UEPA-331
	3. VAZ-2106 engine
	4. Cooling system
	5. Power supply system
	6. Carburetor
	7. System of ignition of the engine UEPA-331
	8. System of ignition of the VAZ-2106 engine
	9. System of production of the fulfilled gases
	10. Coupling
	11. IZh-2126 transmission
		11.1. Description of a design
		11.2. Oil replacement
		11.3. Replacement of an epiploon of a secondary shaft
		11.4. Removal of the drive of a speedometer
		11.5. Removal and installation of the transmission on the car with the engine UEPA-331
		11.6. Removal and installation of the transmission on the car with the VAZ-2106 engine
		11.7. Replacement of an epiploon of a main shaft of the transmission on the car with the engine UEPA-331
		11.8. Replacement of an epiploon of a main shaft of the transmission on the car with the VAZ-2106 engine
		11.9. Replacement of the forward bearing of a main shaft of the transmission
		11:10. Dismantling and assembly of the transmission
	12. VAZ-21074 transmission
	13. Cardan transfer
	14. Zadny Bridge
	15. Forward suspension bracket
	16. Back suspension bracket
	17. Steering
	18. Brake system
	19. Electric equipment
	20. Body
	21. System of ventilation and heating
	22. Features of a design of the IZh-2717 car
	23. Appendix
	24. Care of a car body

11-4-snyatie-privoda-spidometra.html

11.4. Removal of the drive of a speedometer

We perform work on a viewing ditch or the elevator.

We disconnect a flexible shaft from the speedometer drive (see. "Removal of a flexible shaft of the drive of a speedometer").

Key "on 10" we turn off a bolt of fastening of the drive of a speedometer to the transmission...

... also we take out the drive.

For replacement of a rubber sealing ring...

... we hook it the screw-driver.

... also we remove.

We oil a new rubber sealing ring gearbox. We install the drive in the return sequence.