Service of IZh 2126
1. General information
2. Engine UEPA-331
3. VAZ-2106 engine
4. Cooling system
5. Power supply system
6. Carburetor
7. System of ignition of the engine UEPA-331
8. System of ignition of the VAZ-2106 engine
9. System of production of the fulfilled gases
10. Coupling
11. IZh-2126 transmission
11.1. Description of a design
11.2. Oil replacement
11.3. Replacement of an epiploon of a secondary shaft
11.4. Removal of the drive of a speedometer
11.5. Removal and installation of the transmission on the car with the engine UEPA-331
11.6. Removal and installation of the transmission on the car with the VAZ-2106 engine
11.7. Replacement of an epiploon of a main shaft of the transmission on the car with the engine UEPA-331
11.8. Replacement of an epiploon of a main shaft of the transmission on the car with the VAZ-2106 engine
11.9. Replacement of the forward bearing of a main shaft of the transmission
11:10. Dismantling and assembly of the transmission
12. VAZ-21074 transmission
13. Cardan transfer
14. Zadny Bridge
15. Forward suspension bracket
16. Back suspension bracket
17. Steering
18. Brake system
19. Electric equipment
20. Body
21. System of ventilation and heating
22. Features of a design of the IZh-2717 car
23. Appendix
24. Care of a car body
 






b678569c



11-2-zamena-masla.html

11.2. Oil replacement

We perform work on a viewing ditch or the elevator. Before replacement of oil it is necessary to warm up it, having passed not less than 10 km on the car.

Tetrahedron "on 9" we turn off a stopper of a drain opening...

... also we merge oil in the substituted capacity.

We wrap a stopper of a drain opening.

Tetrahedron "on 9" we turn off a stopper of a jellied opening.

We fill in with the syringe oil to the level of the lower edge of a jellied opening.

We wrap a jellied stopper.

"previous page
11.1. Description of a design		 following page"
11.3. Replacement of an epiploon of a secondary shaft