Cause of defect |
Elimination method |
Lamps of headlights, lamps do not burn |
Lamp thread fused |
Replace a lamp |
Weak contact in the boss of a lamp |
Smooth out surfaces, press out a cartridge |
The safety lock fused |
Before replacing a safety lock, check an ohmmeter the chain protected by the fused safety lock for lack of short circuit on "weight" |
Wires are damaged, their tips are oxidized or put leaky on |
Press out plugs, replace faulty wires |
Contacts of the relay are oxidized, relay windings fused, switches are faulty |
Replace the relay, switches, press out plugs, smooth out contacts |
The alarm system (see also "Lamps of headlights, lamps do not burn") does not work |
The switch of the alarm system is faulty |
Replace the switch |
The backing light (see also "Lamps of headlights, lamps do not burn") is not turned on |
The backing switch is faulty (on the transmission) |
Replace the switch |
The lever of the switch of indexes of turn does not come back to a starting position, levers of the understeering switch are not fixed |
Clamps are broken, balls of clamps, springs are lost |
Replace the understeering switch |
The lens of a headlight mists over |
Between the case and the lens moisture gets |
Miss the mark cracks with sealant |
Cracks in the lens of a headlight |
Replace a headlight |
Between moving details of a crank the foreign subject got |
Check installation of levers, correct the deformed levers or replace a screen wiper |
The understeering switch of a screen wiper is faulty |
Replace the switch |
Electric motor brushes hanged, the collector is strongly polluted or burned slightly |
Eliminate lag of brushes, smooth out a collector a glass skin, wipe with the fabric moistened in gasoline. Replace a worn-out motor-reducer |
Break or short circuit in an electric motor anchor winding |
Replace a motor-reducer |
The electric motor of a screen wiper does not work in the faltering mode |
The screen wiper relay is faulty |
Replace the relay |
The understeering switch is faulty |
Replace the switch |
The electric motor of a screen wiper does not stop in the faltering mode |
The screen wiper relay is faulty |
Smooth out contacts of the breaker, if necessary replace the relay |
The contact plate of the trailer switch of a motor-reducer is not unbent when passing a cam |
Sort a motor-reducer and turn in a contact plate or replace a motor-reducer |
Contacts of the trailer switch are oxidized |
Smooth out contacts or replace a screen wiper motor-reducer |
Brushes stop in any situation |
Contacts of the trailer switch badly nestle or are oxidized |
Smooth out contacts, if necessary turn in a plate of the switch or replace a motor-reducer |
The nut of fastening of a crank on a motor-reducer shaft weakened |
Correctly establish a crank and tighten a nut, having applied paint or anaerobic sealant on a carving |
The electric motor of a screen wiper works, but brushes do not move |
The nut of fastening of a crank on a motor-reducer shaft weakened |
Correctly establish a crank and tighten a nut, having applied paint or anaerobic sealant on a carving |
Motor-reducer gear wheel teeths are damaged |
Replace a gear wheel or a motor-reducer |
