18-14-snyatie-regulyatora-davleniya-zadnikh-tormozov-i-ego-privoda.html
18:14. Removal of the regulator of pressure of back brakes and its driveWe perform work on a viewing ditch or the elevator.
Key "on 13" we turn off a nut of fastening of an axis of a rack of the regulator, holding an axis with a key "on 10".
We bring a rack axis out of an opening in an arm of a beam of the back bridge.
We remove a rack from a load spring.
Special key "on 10", covering five sides we unscrew unions of four tubes...
... also we take away them from pressure regulator.
Head "on 13" we turn off two nuts of back fastening of an arm of the regulator of pressure to a body...
... and Rozhkov a key "on 13" we weaken a nut of forward fastening of an arm.
We remove pressure regulator with an arm and a load spring.
We establish details of the drive of the regulator of pressure of back brakes in the return sequence. We pump over the brake system (see. "Pumping of brakes") we also adjust the drive (see. "Check of working capacity and adjustment of the drive of the regulator of pressure of back brakes").
|